Plate Ice Machine LIP-150CHome > Products > Plate Ice Machine> Containerized Type
  • Main Features
  • Specifications
  • Download
  • Layouts
  • Performance Parameters
  • Evaporator is made by advanced laser welding processing technology, solid and durable;
  • Speedy ice doffing process. No extra heat needed, by using hot freon gas itself produced it melts the ice to fall. The whole process only takes 120 seconds;
  • Unique water circulating system. After ice is doffed, the un-frozen water collected in the low water tank will be recycled to make ice. It is energy sufficient design but increase the ice production;
  • SUS304 or aluminum alloy evaporator plates complies to hygiene requirement;
  • Pre-fabricated system, no need to connect pipes and wirings;
  • Easy to transport by rail, road and ocean.

Specification of Plate Ice Machine LIP-150C

Item Specification Unit
Power supply 380V/3P/50Hz Voltage/Phase/Frequency
Refrigerant R22/R404A
Daily capacity 15000kg/day
Cooling mode Water-cooled
Standard condition Ambient temperature 35
Water inlet temperature 25
Operating power Compressor 24.2X2 kw
Cooling tower fan 1.5 kw
Cooling tower pump 1.5 kw
Ice crusher device 1.2 kw
Cooling water pump 1.2 kw
Heated water pump 0.75 kw
Average total 50 kw
Total install power 65 kw
Compressor Refrigeration capacity 53x2 kw
Condensing temperate 38
Evaporating temperature -20
COP. 2.19 kw/kw
Horse power 44x2 HP
Cooling tower module size Cooling tower size ∅2175x2565 (O.D.×H)(mm)
Feed pipe size 3/4'' inch
Cooling water pipe size 4'' inch
Operating weight 1120 Kg
Container info Size 6058x2438x2591 (L×W×H)(mm)
Operating weight 10600 Kg
Parts info Compressor Bitzer, Germany
Expansion valve ALCO, United States
Stop valve DANFOSS, Denmark
Solenoid valve DANFOSS, Denmark
Filter ALCO, United States
Button/indicator Schneider, France
Electrical Schneider, France

Note: Actual Production= Theory Production×WT×AT

Linsky ice machine production will be affected by environment. The main factors are ambient temperature and water inlet temperature. Based on long term actual experiment, Linsky records precise experiment data and conclude chart WT and AT.

When water inlet temperature exceeds 30℃, it is suggested to pre-cool the water by chiller.
When ambient temperature exceeds 45℃, it is suggested to use water-cooled condenser or tailor made your machine.

Copyright © All rights are reserved by Linsky• Formulate future since 2004